This site uses cookies. By using this website, you consent to the use of cookies. Detailed information

AQUAMAT® Tank cleaning units

Hammelmann tank cleaning units remove everything from sticky deposits to rock hard scale from the walls of tanks and vessels at pressures up to 26,100 psi: here are a few examples from our extensive range

 
 
 
L 1200-2

L 1400-2

 
 
 
0.7 inch S arm2 nozzles
Operating pressure:up to 20,300 psi
Flow rate:40 gpm
Access opening:min. 5.5 inch
L 1400-2

L 1500-2

 
 
 
14 mm V arm2 nozzles
Operating pressure:up to 21,700 psi
Flow rate:80 gpm
Access opening:up to 5.5 inch
L 1800-2

L 1800-2

 
 
 
0.5 inch V arm2 nozzles
Operating pressure:up to 26,100 psi
Flow rate:40 gpm
Access opening:min. 7.5 inch
 
XL-500-2

XL-500-2

 
 
 
2.2 inch L arm2 nozzles
Operating pressure:up to 7,300 psi
Flow rate:105 gpm
Access opening:min. 6.7 inch
XL 1600-2

XL 1600-2

 

Chemical version

1.4 inch S arm2 nozzles
Operating pressure:up to 23,200 psi
Flow rate:66 gpm
Access opening:min. 7.5inch
XL 1600-2

XL 1600-2

 
 
 
0.5 inch v arm2 nozzles
Operating pressure:up to 23,200 psi
Flow rate:66 gpm
Access opening:min. 7.5inch
 
XXL 1600-2

XXL 1600-2

 
 
 
2.2 inch lever arm2 nozzles
Operating pressure:up to 23,200 psi
Flow rate:132 gpm
Access opening:min. 11.8 inch
Gastight

Gastight

 
lever arm 1.4 inchNozzle type L
Operating pressure::up to 23,200 psi
Flow rate:66 gpm
Access opening:min. 7.9 inch
Aquamat Select

Aquamat Select

 

The oscillating nozzle arm action greatly reduces cleaning times


2 nozzles (cleaning)
Operating pressure:up to 23,200 psi
Flow rate:53 gpm
Access opening:min. 11.8 inch
 

Possible feature:

Chemieausführung
Druckbeständig
Heißwasser (85 °C)
Ex Zone 1 und 2
 
 
 

Aquamat® tank cleaning units

Hammelmann automatic tank cleaners remove deposits including hardened materials from tank internal walls at pressures of up to 1800 bar.

The units operate solely with the power of high pressure water. The wide range of Hammelmann nozzle holder arms achieve the cleaning standard required at the specified performance parameters. Units can be fitted with one or two arms.

  • Internal cleaning of autoclaves, vessels,
    Euro containers, reactors, agitator vessels,
    holding tanks, drying towers etc.

  • Decontamination

  • Disinfection (with chemical additives)

  • Cleaning the interior of large diameter
    pipework with deployment sledge
  • Minimum pressure losses result
    in a high energy saving
  • Concentrated jet has a strong cutting
    action and long throw
  • Wear-resistant, smoothly adjustable
    braking system. The adjusting mechanism
    is dirt-protected.
  • Compact and corrosion-resistant housing
  • High reliability thanks to simple and
    low-maintenance design
  • Freely suspended operation possible
 
 
 

Simulation of tank cleaning

Homogenous and thorough cleaning is ensured by an optimal interaction of rotational movements combined with an adjustable speed.

 
Simulation of tank cleaning
tank cleaning unit
 

Before

After

 

The cleaning action covers a wide area thanks to the rotating motion of the axes 1 und 2