Turbo Jets

Turbo jets have a high speed rotating nozzle body which prevents “striping“ inside the tube. The rotation is effected by the reaction force of the water jets.

 
 
 
Allrounder + Pusher
Washer + Pusher
Special version
 
Visualization Combination Methods
 
 
 

RadialJet

Washers have axially arranged 90° bores that, due to their efficiency achieve the maximum removal of pipe wall deposits.

Applications

  • Partially blocked pipes
  • Removing heavy deposits from pipe walls

Allrounder

Allrounders have, in addition to the efficiency of the washer bores, front facing bores. These have a cleaning effect in front of the nozzle.

Applications

  • Blocked pipes 
  • Very hard deposits

Pusher

The pusher is installed as an adapter between the high pressure lance or hose and the RadialJet/Allrounder. The driver has 3 angled rear facing nozzles which push the Turbo jet into the pipe using the reaction force of the water jets.

 
 
 

Up to 21,800 psi – unbraked

 
 
Up to 21,800 psi – unbraked

Turbojet Ø

Connection
thread

Tube diameter

Nozzles

Max. flow rate gpm at
21,800 psi
(incl. leakage)

0.47 inch

M 7

0.59 - 1.18 inch

2 x Ø 0,9 radial

approx. 8 gpm

0.55 inch

G 1/8” 

0.67 - 1.38 inch

2 x Ø 1,0 radial

approx. 10 gpm

0.71 inch

G 1/4” 

0.79 - 1.57 inch

2 x Ø 1,1 radial

approx. 12 gpm

0.87 inch

G 1/4”

0.98 - 1.97 inch

2 x Ø 1,0 radial

approx. 13 gpm

1.10 inch

G 1/4”

1.30 - 2.36 inch

2 x Ø 1,1 radial

approx. 16 gpm

 
 
 
 
 
 
Up to 21,800 psi – unbraked

Turbojet Ø

Connection
thread

Tube diameter

Nozzles

Max. flow rate gpm at
21,800 psi
(incl. leakage)

0.71 inch

G 1/4” 

0.79 - 1.57 inch

2 x Ø 0,6 axial
2 x Ø 0,6 radial

approx. 11 gpm

0.87 inch

G 1/4” 

0.98 - 1.97 inch

2 x Ø 0,6 axial
2 x Ø 0,6 radial

approx. 11 gpm

 
 
 
 

Up to 36,300 psi – unbraked

 
 
Up to 36,300 psi – unbraked

Turbojet Ø

Connection
thread

Tube diameter

Nozzles

Max. flow rate l/min at
2500 bar (incl. leakage)

0.59 inch

G 3/8” - 24 UNF LH

0.71 - 1.38 inch

2 x Ø 0,6 radial

approx. 7 gpm

0.63 inch

G 3/8” - 24 UNF LH

0.75 - 1.38 inch

2 x Ø 0,6 radial

approx. 7 gpm

0.71 inch

G 3/8” - 24 UNF LH

0.79 - 1.57 inch

2 x Ø 0,7 radial

approx. 9 gpm

0.79 inch

M 14 x 1,5 LH

0.91 - 1.77 inch

2 x Ø 0,7 radial

approx. 9 gpm

 
 
 
 
 
 

Driver

 
 
BIS 1500 BAR - UNGEBREMST

Max. diameter
of drive nozzle

Qmax gpm
up to 14,500 psi

Connection thread
(inside / outside)

Hose nominal i/d mm

0.51 inch

approx. 1.6 / 3.4 / 6 / 9.2

G 1/8” 

DN4

0.51 inch

approx. 2.4 / 3.4 / 6 / 9.2

G 1/8” 

DN6

0.71 inch

approx. 1.6 / 6 / 9.2 / 13.5

G 1/4” 

DN4

0.71 inch

approx. 3.4/6.1/9.2/11.4/13.5

G 1/4” 

DN6

 
 


up to 43,500 psi



0.75 inch

1.6 – 13.5

M14 x 1,5 LH

DN5