AQUAMAT® Tank cleaning units

Hammelmann tank cleaning units remove everything from sticky deposits to rock hard scale from the walls of tanks and vessels at pressures up to 1800 bar: here are a few examples from our extensive range

 
L 1200-2

L 1400-2

 
 
 
18 mm S arm2 nozzles
Operating pressure:max. 1400 bar
Flow rate:150 l/min
Access opening:min. 140 mm
L 1400-2

L 1500-2

 
 
 
14 mm V arm2 nozzles
Operating pressure:max. 1500 bar
Flow rate:300 l/min
Access opening:min. 140 mm
L 1800-2

L 1800-2

 
 
 
14 mm V arm2 nozzles
Operating pressure:max. 1800 bar
Flow rate:100 l/min
Access opening:min. 140 mm
 
XL-500-2

XL-500-2

 
 
 
56 mm L arm2 nozzles
Operating pressure:max. 500 bar
Flow rate:400 l/min
Access opening:min. 170 mm
XL 1600-2

XL 500-2

 

Chemieausführung

35 mm S arm2 nozzles
Operating pressure:max. 500 bar
Flow rate:400 l/min
Access opening:min. 170 mm
XL 1600-2

XL 1600-2

 
 
 
13 mm v arm2 nozzles
Operating pressure:max. 1600 bar
Flow rate:250 l/min
Access opening:min. 190 mm
 
XXL 1600-2

XXL 1600-2

 
 
 
56 mm lever arm2 nozzles
Operating pressure:max. 1600 bar
Flow rate:500 l/min
Access opening:min. 300 mm
Gastight

Gastight

 
lever arm 35 mmNozzle type L
Operating pressure::max. 1600 bar
Flow rate:250 l/min
Access opening:min. 200 mm
Aquamat Select

Aquamat Select

 

The oscillating nozzle arm action greatly reduces cleaning times


2 nozzles (cleaning)
Operating pressure:max. 1600 bar
Flow rate:500 l/min
Access opening:min. 300 mm
 

Possible feature:

Chemieausführung
Druckbeständig
Heißwasser (85 °C)
Ex Zone 1 und 2
 
 
 

Aquamat® tank cleaning units

Hammelmann automatic tank cleaners remove deposits including hardened materials from tank internal walls at pressures of up to 1800 bar.

The units operate solely with the power of high pressure water. The wide range of Hammelmann nozzle holder arms achieve the cleaning standard required at the specified performance parameters. Units can be fitted with one or two arms.

  • Internal cleaning of autoclaves, vessels,
    Euro containers, reactors, agitator vessels,
    holding tanks, drying towers etc.

  • Decontamination

  • Disinfection (with chemical additives)

  • Cleaning the interior of large diameter
    pipework with deployment sledge
  • Minimum pressure losses result
    in a high energy saving
  • Concentrated jet has a strong cutting
    action and long throw
  • Wear-resistant, smoothly adjustable
    braking system. The adjusting mechanism
    is dirt-protected.
  • Compact and corrosion-resistant housing
  • High reliability thanks to simple and
    low-maintenance design
  • Freely suspended operation possible
 
 
 

Simulation of tank cleaning

Homogenous and thorough cleaning is ensured by an optimal interaction of rotational movements combined with an adjustable speed.

 
Simulation of tank cleaning
tank cleaning unit
 

Before

After

 

The cleaning action covers a wide area thanks to the rotating motion of the axes 1 und 2